The latest product of our plant is the PNG series magnet control unit generator control units
The units of the given series are designed to control lifting magnets whose operational amperage doesn't exceed 125A (PNG-300) and 200A (PNG-600) where land supply-line is not available.
The PNG series control units function paired with either 1-phase or 3-phase power generators. Such system can be mounted onto any autocrane, excavator or a forklift. The transducers have electronic protective means against short-circuiting under load, ground-circuiting of output terminals, the same electronic means protects the unit at breaking the load power cable.
PNG-300 | PNG-600 | |
Output voltage, DC, V | 220+5% | 220+5% |
Maximum amperage, A (Tmc = 20 Сº) | Depends on the generator's characteristics | Depends on the generator's characteristics |
Productive time operational mode % | 60 | 60 |
Degaussing time, sec, not exceeding | 3 | 3 |
Power supply | Depends on the generator's characteristics | Depends on the generator's characteristics |
Operational cycle duration, not exceeding, min | 10 | 10 |
Dimensions, not exceeding, mm | 320х320х120 | 410х360х165 |
Mass, mot exceeding, kg | 7 | 12 |
постоянное, 220
10 – 230
Определяется характеристиками генератора
60
3
Определяется характеристиками генератора
10
410х360х165
12
постоянное, 220
10 – 230
Определяется характеристиками генератора
60
3
Определяется характеристиками генератора
10
320х320х120
7