 |
 |
 |
|
|
The terminal box of all the DKM series lifting electromagnets has IP55.
If the lifting magnets are produced with a copper coil all their basic characteristics remain unchanged, the weight of the magnet increases to 10%.
The DKM series lifting electromagnets are designed to handle scrap, slabs, sheet steel. These electromagnets can be set in Fuchs, Liebherr, Atlas, Sennebogen and other scrap handlers completed with an adapter plate which let working with an electromagnet without removing a grab.
Ultralight lifting capacity
| Model | Breakaway force, kg | Lifting capacity, kg | Amperage, A | P, kW | Dead weight, kg | A recommended crane lifting capacity, t | ||
| on plate, not exceeding | on scrap | pig iron | ||||||
| DKM120SL | 25000 | 12500 | See drawing 1 | 610 | 40 | 8,8 | 1050 | 3,2; 5 |
| DKM140SL | 32000 | 16000 | 920 | 55 | 12,1 | 1200 | 3,2; 5 | |
| DKM165SL | 45000 | 22500 | 1230 | 75 | 16,5 | 2800 | 10, 16 | |
| DKM200SL | 75000 | 37500 | 2550 | 95 | 20,9 | 4300 | 10, 16, 25 |
Light lifting capacity
| Model | Breakaway force, kg | Lifting capacity, kg | Amperage, A | P, kW | Dead weight, kg | A recommended crane lifting capacity, t | ||
| on plate, not exceeding | on scrap | pig iron | ||||||
| DKM080L | 10000 | 5000 | See drawing 2 | 200 | 20 | 4,3 | 450 | 3,2; 5 |
| DKM100L | 20000 | 10000 | 300 | 30 | 6,5 | 950 | 3,2; 5 | |
| DKM120L | 27000 | 13500 | 760 | 44 | 9,7 | 1400 | 3,2; 5 | |
| DKM140L | 37000 | 18500 | 1150 | 60 | 13,2 | 2100 | 5 | |
| DKM150L | 42000 | 21000 | 1330 | 72 | 15,8 | 2500 | 5, 10 | |
| DKM165L | 50000 | 25000 | 1640 | 85 | 18,7 | 3200 | 10, 16 | |
| DKM180L | 70000 | 35000 | 1950 | 97 | 21,3 | 4000 | 10, 16, 25 | |
| DKM200L | 80000 | 40000 | 2850 | 110 | 24,0 | 5500 | 10, 16, 25 | |
| DKM230L | 100000 | 50000 | 4100 | 140 | 31,0 | 7000 | 16, 25, 32 |
Medium lifting capacity
| Model | Breakaway force, kg | Lifting capacity, kg | Amperage, A | P, kW | Dead weight, kg | A recommended crane lifting capacity, t | ||
| on plate, not exceeding | on scrap | pig iron | ||||||
| DKM120S | 32000 | 16000 | See drawing 3 | 930 | 48 | 10,6 | 1550 | 5 |
| DKM140S | 45000 | 22500 | 1330 | 63 | 13,8 | 2200 | 5 | |
| DKM150S | 60000 | 30000 | 1640 | 75 | 16,5 | 2700 | 5, 10 | |
| DKM165S | 70000 | 35000 | 2050 | 87 | 19,1 | 3300 | 10, 16 | |
| DKM180S | 90000 | 45000 | 2250 | 100 | 22,0 | 4400 | 10, 16, 25 | |
| DKM200S | 110000 | 55000 | 3470 | 118 | 26,0 | 6200 | 10, 16, 25 | |
| DKM230S | 120000 | 60000 | 4800 | 151 | 33,0 | 7500 | 16, 25, 32, 40 |
Heavy lifting capacity
| Model | Breakaway force, kg | Lifting capacity, kg | Amperage, A | P, kW | Dead weight, kg | A recommended crane lifting capacity, t | |
| on plate, not exceeding | on scrap | pig iron | |||||
| DKM120T | 35000 | 17500 | See drawing 4 | 50 | 11,0 | 1750 | 5 |
| DKM140T | 50000 | 25000 | 1500 | 68 | 15,0 | 2400 | 5, 10 |
| DKM150T | 63000 | 31500 | 1800 | 79 | 17,4 | 3000 | 5, 10 |
| DKM165T | 75000 | 37500 | 2200 | 90 | 19,8 | 3800 | 10, 16 |
| DKM180T | 95000 | 47500 | 2400 | 105 | 23,1 | 4650 | 10, 16, 25 |
| DKM200T | 115000 | 57500 | 3650 | 123 | 27,0 | 6800 | 16, 25, 32 |
| DKM230T | 125000 | 62500 | 5000 | 165 | 36,0 | 7750 | 16, 25, 32, 40 |
Superheavy lifting capacity
| Model | Breakaway force, kg | Lifting capacity, kg | Amperage, A | P, kW | Dead weight, kg | A recommended crane lifting capacity, t | |
| on plate, not exceeding | on scrap | pig iron | |||||
| DKM120ST | 38000 | 19000 | See drawing 5 | 52 | 11,5 | 2200 | 5 |
| DKM140ST | 53000 | 26500 | 1750 | 70 | 15,4 | 2800 | 5, 10 |
| DKM150ST | 68000 | 34000 | 2050 | 82 | 18,0 | 3500 | 10, 16 |
| DKM165ST | 75000 | 37500 | 2500 | 95 | 21,0 | 4300 | 10, 16 |
| DKM180ST | 100000 | 50000 | 2800 | 115 | 25,3 | 5000 | 10, 16, 25 |
| DKM200ST | 120000 | 60000 | 4000 | 150 | 33,0 | 7200 | 16, 25, 32 |
| DKM230ST | 130000 | 65000 | 5500 | 183 | 40,0 | 8550 | 16, 25, 32, 40 |
25000
12500
Смотреть рис.
610
40
8,8
1050
3,2; 5
32000
16000
Смотреть рис.
920
55
12,1
1200
3,2; 5
45000
22500
Смотреть рис.
1230
75
16,5
2800
10, 16
75000
37500
Смотреть рис.
2550
95
20,9
4300
10, 16, 25
10000
5000
Смотреть рис.
200
20
4,3
450
3,2; 5
20000
10000
Смотреть рис.
300
30
6,5
950
3,2; 5
27000
13500
Смотреть рис.
760
44
9,7
1400
3,2; 5
37000
18500
Смотреть рис.
1150
60
13,2
2100
5
42000
21000
Смотреть рис.
1330
72
15,8
2500
5, 10
50000
25000
Смотреть рис.
1640
85
18,7
3200
10, 16
70000
35000
Смотреть рис.
1950
97
21,3
4000
10, 16, 25
80000
40000
Смотреть рис.
2850
110
24,0
5500
10, 16, 25
100000
50000
Смотреть рис.
4100
140
31,0
7000
16, 25, 32
32000
16000
Смотреть рис.
930
48
10,6
1550
5
+7 (8332) 249 111 Ext. 1113
m_taraban@kepdimal.ru
