The DBZh series voltage transducers are designed to control suspended guard magnets of DZh, DZhSh series or a group of guard magnets of summed current of 40(80) A (Tmc = 20 °C).
Tmc Ц temperature of the guard magnet coil
The transducers are designed to be used at:
- Temperature from 40 °C below zero to 45 °C above zero
- Relative humidity not exceeding 98% (operational conditions U2 according to GOST 15150-69)
- The transducers can be installed in mechanically vibrating locations - frequency from 0.1 to 100 Hz as well as at accelerations of up to 20 m/s2 (M25 according to GOST 17516.1-90)
Features:
- Protection at short-curcuiting under load as well as at ground-curcuiting of output terminals;
- Availability of output circuits for additional warning and control units;
- Blocking recurrent powering of the guard magnet at a short-term drop in the supply-line current;
- Cutting the power off the guard magnet after breaking the interlockswitch in the controlling circuit;
- Visual an audio emergency warning signals;
- Stabilization of the guard magnet's operational current.
Для ДБЖ-80 дополнительно:
- Широкий диапазон выходных напряжений (токов) для различных вариантов нагрузки.
- Цифровую стабилизацию рабочего тока нагрузки.
- Программируемые варианты выхода блока из режима "перегрев магнита".
- Возможность организации удаленного управления преобразователем.
Technical data
|
DBZh-40 |
DBZh-80 |
Nominal output voltage, DC, V |
110+5% |
110-220+5% |
Maximum amperage, A (Tmc = 20 ºC) |
40 |
80 |
Productive time operational mode % |
100 |
100 |
Operational cycle duration (hr.) |
24 |
24 |
Supply-line voltage, V |
~380+10% / -15% |
~380+10% / -15% |
Current |
2-phase, AC |
3-phase, AC |
Dimensions, mm |
320х320х120 |
510х460х250 |
Mass, kg |
7 |
20 |