Standard modification | The construction for scrap handlers |
The DKMs series lifting electromagnets are intended to reload scraps, slabs, sheet steel. These electromagnets correspond to the requirements of DIN VDE 0580. The technology patented by “KEP “DimAl” is used to manufacture the DKMs series electromagnets.
Warranty for magnets 3 years.
Model | Hight, mm | Weight, kg | Capacity*, kW | Breakaway force**, кN | Slabs | Lifting capacity***, kg | Analogue | |||
Pig iron | Iron scrap | Foundry pig | Chip scrap | |||||||
DKMs100/A-U1
|
1000 | 830 | 4,8 | 20000 | 10000 | 480 | 420 | 370 | 190 | RLB 10 |
DKMs115/A-U1 | 1150 | 1100 | 5,5 | 26000 | 13000 | 660 | 530 | 490 | 260 | RLB 11,5 |
DKMs125C/A-U1 | 1250 | 1400 | 8,8 | 29000 | 14500 | 850 | 650 | 580 | 340 | RLB 12,5 |
DKMs130L/A-U1 | 1300 | 1200 | 10,5 | 25000 | 12500 | 800 | 650 | 600 | 360 | RSL 13 |
DKMs135C/A-U1 | 1350 | 1900 | 10 | 32000 | 16000 | 980 | 790 | 710 | 390 | RLB 13,5 |
DKMs135T/A-U1 | 1350 | 2300 | 12 | 40000 | 20000 | 1110 | 1060 | 1010 | 510 | RHBL 13,5 |
DKMs135ST/A-U1 | 1350 | 3400 | 15 | 53000 | 26500 | 1500 | 1450 | 1390 | 670 | RHB 13,5 |
DKMs150L/A-U1 | 1500 | 2000 | 12,2 | 36000 | 18000 | 1000 | 800 | 750 | 450 | RSL 15 |
DKMs150C/A-U1 | 1500 | 2500 | 11,7 | 42000 | 21000 | 1340 | 1150 | 980 | 530 | RLB 15 |
DKMs150T/A-U1 | 1500 | 3500 | 16 | 52000 | 26000 | 1540 | 1480 | 1400 | 690 | RHBL 15 |
DKMs150ST/A-U1 | 1500 | 5000 | 20 | 70000 | 35000 | 2200 | 2150 | 2050 | 940 | RHB 15 |
DKMs170L/A-U1 | 1700 | 2500 | 17 | 45000 | 22500 | 1350 | 1100 | 1000 | 600 | RSL 17 |
DKMs170C/A-U1 | 1700 | 3400 | 17,8 | 62000 | 31000 | 1980 | 1570 | 1470 | 770 | RLB 17 |
DKMs170T/A-U1 | 1700 | 5000 | 22 | 70000 | 35000 | 2350 | 2080 | 1950 | 970 | RHBL 17 |
DKMs170ST/A-U1 | 1700 | 6200 | 24 | 90000 | 45000 | 3000 | 2950 | 2830 | 1300 | RHB 17 |
DKMs185ST/A-U1 | 1850 | 8500 | 26 | 110000 | 55000 | 3700 | 3650 | 3500 | 1570 | RHB 18,5 |
DKMs190L/A-U1 | 1900 | 5200 | 22 | 75000 | 37500 | 2600 | 2100 | 2080 | 920 | RLB 19 |
DKMs200T/A-U1 | 2000 | 7500 | 27 | 110000 | 55000 | 3300 | 3050 | 2900 | 1450 | RHBL 20 |
DKMs200ST/A-U1 | 2000 | 10000 | 30 | 135000 | 67500 | 4500 | 4100 | 3940 | 1750 | RHB 20 |
DKMs220C/A-U1 | 2200 | 7000 | 30,5 | 85000 | 42500 | 3400 | 3080 | 3000 | 1500 | RLB 22 |
DKMs220T/A-U1 | 2200 | 10000 | 36 | 130000 | 65000 | 4330 | 4100 | 3750 | 1950 | RHBL 22 |
DKMs220ST/A-U1 | 2200 | 14000 | 34 | 170000 | 85000 | 5500 | 4800 | 4600 | 2020 | RHB 22 |
DKMs250T/A-U1 | 2500 | 13000 | 48 | 155000 | 77500 | 5160 | 4850 | 4570 | 2320 | RHBL 25 |
DKMs300T/A-U1 | 3050 | 15000 | 59 | 200000 | 100000 | 7030 | 6650 | 6280 | 3160 | RHBL 30 |
* The data are correct for a cold electromagnet and are intended for evaluation possibilities of electrical equipment connection.
** The breakaway force is measured in accordance with DIN VDE 0580 on plate with air-gap 1/300 of electromagnet's diameter.
*** The above-mentioned lifting capacity values are in accordance with average values and can be different (more or less) at operation, it depends on a lifted cargo, its form, alloy composition, storage conditions, operator.
The CY duty cycle is 75% / 10 minutes. Aluminum wound. Technical parameters of electromagnets for heavy category (for example, a hot load) are available on request.
The terminal box of all the DKMs series lifting electromagnets has IP55.
1900
5200
22
75000
37500
2600
2100
2080
920
2000
7500
27
110000
55000
3300
3050
2900
1450
2000
10000
30
135000
55000
4500
4100
3940
1750
2200
7000
30,5
85000
42500
3400
3080
3000
1500
2200
10000
36
130000
65000
4330
4100
3750
1950
2200
14000
34
170000
85000
5500
4800
4600
2020
2500
13000
48
155000
77500
5160
4850
4570
2320
3050
15000
59
200000
100000
7030
6650
6280
3160